Hi,
I'm deploying a VMM service instance which includes NLB and I'm struggling to make it work.
I went through the article: http://technet.microsoft.com/library/hh335098.aspx and check some blog posts with no success.
The errors that I'm getting when the VMM placement runs are:
* No appropriate load balancer could be located for load balancer configuration with template name "NLB Name"
* No appropriate IP pool with available virtual IP addresses could be located for load balancer configuration with template name "NLB Name"
* The virtual machine or tier load balancer configuration requires an IP pool and there are no appropriate IP pools accessible from the host.
* The load balancer for virtual machine tier configuration [NO_PARAM] uses a network load balancer template that requires a common subnet for all virtual IP and virtual machine network IP addresses. The environment has no connections to subnets with available
IP and virtual IP addresses.
My setup in brief:
VMM 2012 SP1
VIP profile created : type specific Microsoft NLB, protocol TCP (No persistence) port 80
1 Logical network, with a network site associated (class C network, no VLAN)
1 IP pool associated to the logical network
VIP reservation made - available address: DIP 12, VIP 10
VM template used in the service template is configured to connect to the Logical network and has IPv4 only, Static MAC address and enable spoofing MAC address. in addition the service template includes the NLB feature.
Thank you in advance